Durand Water Filters - Use a filter, or BE the filter

 

Durand Stoneware Water Filter System
with
BERKEY PF-4™ REDUCTION ELEMENTS

Handmade Stoneware Fluoride Removal Filter System

Australian Made

Capacity approx. 15 litres

Available in Gloss White, Black Bamboo, and Blue lagoon

Due to popular demand we now carry a specially designed new system, with a fluoride and arsenic reduction element.

This element works in conjunction with a Doulton filter to reduce the fluoride level by more than 95%. This element will filter 1000 litres before it needs to be replaced.


Doulton Ceramic Filters Will Remove
at least:-

  • 95% of Chlorine
  • 99.999% of Harmful Bacteria
  • 99.999% of Amoeba
  • 98% Suspended Solids
  • 99.999% of Giardia
  • 99.999% of Cryptosporidium

    Particulate Reduction

  • 0.9micron>99.99%
  • 0.5micron>99.9%
  • 0.2micron>98%.

Each "Fluoride Removal" System
includes :-

  • 1 Complete Stoneware System.

  • 1 Doulton Filter
    (Suitable for 2000 Litres)

  • 2 Berkey PF-4™ Reduction Elements
    (Suitable for 1000 Litres Each)

These reduction elements are designed to work in conjunction with a
Doulton Super Sterasyl Ceramic Filter.

This combination of 1 Doulton Filter, & 2 Fluoride Removal Elements, will give you 2000 Litres of filtered water, enough for approximately a year of drinking water, before you need to purchase the replacement filter & elements.

These prices include shipping and handling, so please order by region.

Gloss White
Black Bamboo
Blue Lagoon

Durand Stoneware Water Filter System
with
2 Berkey PF-4™ Reduction Elements

SE Qld
$390
Order Online
$390
Order Online
$390
Order Online
Qld/NSW
$395
Order Online
$395
Order Online
$395
Order Online
ACT/Vic
$405
Order Online
$405
Order Online
$405
Order Online
SA
$425
Order Online
$425
Order Online
$425
Order Online
WA/Tas/NT
$435
Order Online
$435
Order Online
$435
Order Online

 

Berkey PF elements :

Contain inert high-grade activated alumina, the most efficient way for extracting fluoride from drinking water. These element works in conjunction with a Doulton filter,and will reduce these unwanted impurities by “absorption”.

Fluoride by :    >95%, Lead, Arsenic, MTBE, DBCP, THM”s, Herbicides+Pesticides, & heavy metal ions.

TECHNICAL INFORMATION:

*Fluoride : Testing for fluoride was based on 20-30ppm of the ion in the influent aqueous solution at a flow rate of no more than 3 gpm (11 lpm) per cubic foot of media. Results of < 1ppm of the fluoride ion in the effluent were typical for the media (>95% reduction). Under optimum conditions, effluent concentrations of less than 50 ppb were readily achieved (>99.75% reduction).

*Arsenic: This product uniquely targets the entire family of arsenic oxide anions as well as the arsenic cations.

*Lead: Tests have shown that when 7,500 litres of influent water at a concentration of lead of 150-200 ppb pass through 200 grams of media at a flow rate of 1gp , the lead level was reduced to less than 1ppb (99% reduction).

*MTBE (Methyl-terteiary-butyl-ether): Berkey PF-4™ elements are manufactured to exceed ANSI/NSF standard 53 which requires that MTBE be reduced by at least two thirds from an influent rate (water going out) of less than 5ppb (>95% reduction*) *Actual capacity is dependent on the presence of other competing contaminants in the source water. High levels of total organic carbons and volatile organic compounds may reduce the capacity and efficiency of the elements.

REPLACEMENT:

Under normal conditions it is recommended that each PF-4™ element be replaced after 1,000 litres (or 2,000 ltrs if you are using two elements in your system). If you consume about 5 litres a day of filtered water you would need replacement every 6 months in a system using 1 filter and 1 element at a time. Every 12 months if using a system which uses 2 filters and 2 elements. Actual capacity is dependent on the presence of other competing contaminants in the source water. High levels of fluoride, arsenic and heavy metals may reduce the capacity and efficiency of the elements.

Caution: Filters Must be Primed BEFORE USE!

Do not install PF-4™ Elements before reading Installation Instructions.

For use with Durand Fluoride Reduction Systems or British Berkefeld Stainless Steel Systems. To be used in conjunction with a Doulton Super Sterasyl Ceramic Filter.

 

We accept payment via direct deposit, money order,cheque, or credit card.
Purchases can be made over the phone, by fax or email.

Please email us at office@durand.com.au or phone us on (07) 55 333 611, or fax (07) 55 600 953.

Our office hours are 8am - 1pm, Monday to Friday.

or
Snail Mail us at

Durand Water Filters
32A Jardine Road
Lower Beechmont, QLD, 4211

 

Wholesale Information